• Custom accessories truck dealer in Oklahoma City, Oklahoma had a request from a customer to coat the inside of his race car trailer.
• Problem with the plywood bottom was a clean up issue and the owner wanted the surface to be non-skid when exposed to oil.
• Owner wanted a tough, durable coating that was easily cleanable, water resistant and could be pressure washed.
• The coating had to stand up against impact from tools.
• This application was completed in April of 2000.

 MATERIAL:

• Products specified:
  

  1. Primer - ChemLoc 213 Manufactured by Lord Chemicals.
  2. Coating - GatorHyde LP Manufactured by Elastomer Specialties, Inc.
  3. Color - Black

• The entire trailer bed, manufactured of 1 inch plywood, was vacuumed out, the walls were then masked off 2 feet up the sides.
• ChemLoc 213 was applied, by paint roller, to the specified surface area.
• GatorHyde LP was installed using a Condor Low Pressure Pump.
• The polyurea coating was applied at 60-65 mils.
• The entire coating portion of the project took less than 45 minutes.